Welcome to CTM JSC
| CAPACITY | GLS-150 | GLS-200 |
| Max. swing diameter | Ø 500 mm | |
| Swing over saddle | Ø 310 mm | |
| Max. turning diameter *1 | Ø 360 mm / Ø 280 mm*2 | |
| Standard turning diameter *1 | Ø 185 mm | |
| Max. turning length *1 | 500 mm | |
| Max. weight load *3 | 85 kg | |
| Chuck size | Ø 6" | Ø 8" |
| Bar capacity | Ø 51 mm | Ø 65 mm |
| SPINDLE | GLS-150 | GLS-200 |
| Hole through spindle | Ø 61 mm | Ø 76 mm |
| Spindle bearing diameter | Ø 90 mm | Ø 110 mm |
| Hydraulic cylinder | Ø 8" | Ø 10" |
| Spindle nose | A2-5 | A2-6 |
| Motor output ( Cont. / 30 min. ) | 11 / 15 kW ( 15 / 20 HP ) | |
| Motor full output speed | 750 rpm | |
| Spindle drive system | Direct Belt Drive | |
| Spindle drive ratio | 1 : 1 ( Opt. 211 : 151 ) | 1 : 1 ( Opt. 211 : 171 ) |
| Spindle speed range | 60 ~ 6,000 rpm | 45 ~ 4,500 rpm |
| Spindle full output speed | 750 rpm | |
| BUILT-IN SPINDLE MOTOR ( OPTIONAL ) | ||
| Spindle motor type | αB112M / 15,000i | --- |
| Motor output ( Cont. ) | 5.5 kW ( 7.4 HP ) | --- |
| Motor output ( 30min. / Peak ) | 7.5 kW ( 10 HP ) | --- |
| Bar capacity | Ø 45 mm | --- |
| Cs-AXIS SPINDLE ( OPTIONAL ) | ||
| Cs-axis drive motor | Bz-sensor | |
| Min. spindle indexing angle | 0.001° | |
| Dynamic accuracy | ± 0.02° | |
| X & Z AXES | GLS-150 | GLS-200 |
| Max. X / Z axes travel*1 | 210 / 520 mm | |
| X / Z axes rapids | 30 m/min. | |
| Slide way type | Linear Guide Way | |
| Feed rates | 1 ~ 4,800 mm/min. | |
| X / Z axes servo motor | AC 2.7 kW ( 3.6 HP ) | |
| X / Z axes ball screw Ø / pitch | Ø 32 mm / Pitch 10 | |
| X / Z axes thrust ( Cont. ) | 769 kg | |
| TURRET | GLS-150 | GLS-200 |
| Stations | 12 / 10 T | |
| Indexing drive | FANUC AC Servo motor | |
| Indexing speed | 0.2 sec. Adjacent / 0.5 sec. ( Single step ) | |
| Accuracy | Positioning : ± 0.00069°, Repeatability: ± 0.00027° | |
| OD tool shank size | □ 25 mm | |
| ID tool shank size | Ø 40 mm | |
| LIVE TOOLING TURRET ( OPTIONAL ) | ||
| Max. turning length | 340 mm | |
| Stations | 12 T | |
| Live tooling stations | 12 T | |
| Live tooling drive motor | AC 2.5 kW ( 3.3 HP ) | |
| Live tooling torque | 8 N-m | |
| Indexing drive type | FANUC AC Servo motor | |
| Index speed | 0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step ) | |
| OD tool shank size | □ 20 mm | |
| ID tool shank size | Ø 25 mm | |
| Live tooling shank size | 1 ~ 16 mm ER 25 | |
| Live tooling rpm range | 10 ~ 4,000 rpm | |
| Y-AXIS ( OPTIONAL ) | GLS-150 | GLS-200 |
| Max. turning diameter | Ø 250 mm | |
| Max. X-axis travel | 190 mm | |
| Max. Y-axis travel | 70 mm = ± 35 mm | |
| X / Y axes rapids | 24 / 10 m/min. | |
| Slide way type | Linear Ways | |
| Feed rates | 1 ~ 4,800 mm/min. | |
| X / Y axes servo motor | AC 2.7 kW ( 3.6 HP ) | |
| X-axis ball screw Ø / pitch | Ø 32 mm / Pitch 10 | |
| Y-axis ball screw Ø / pitch | Ø 32 mm / Pitch 6 | |
| X / Y axes thrust ( Cont. ) | 1,282 kg | |
| TAILSTOCK ( OPTIONAL ) | ||
