Welcome to CTM JSC
| CAPACITY | GV-1000 |
| Max. swing diameter | Ø 1,020 mm ( 40.16" ) |
| Max. turning diameter | Ø 1,000 mm ( 39.37" ) |
| Standard turning diameter | Ø 330 mm ( 12.99" ) |
| Max. turning length | 760 mm ( 29.92" ) |
| Hydraulic chuck size | 15" ~ 24" ( Opt. bearing diameter Ø 160 mm ( 6.30" ) ) |
| 18" ~ 32" ( Opt. bearing diameter Ø 200 mm ( 7.87" ) ) | |
| SPINDLE | GV-1000 |
| Spindle bearing diameter | Ø 160 mm ( 6.30" ) ( Opt. Ø 200 mm ( 7.87" ) ) |
| Spindle nose | A2-11 ( Opt. A2-15 ) |
| Spindle motor type | FANUC α P60 / 4,500 i ( AC / Wide-Range ) |
| Motor output ( Cont. ) | 22 kW ( 30 HP ) |
| Motor output ( 30 min. ) | 30 kW ( 40 HP ) |
| Motor full output speed | 400 rpm |
| Spindle drive system | Belt + Gear |
| Gear Step | 3 |
| Spindle speed range | 20 ~ 2,000 rpm ( 15" , 18" chuck ) |
| 15 ~ 1,500 rpm ( 21" , 24" chuck ) | |
| 15 ~ 600 rpm ( 32" chuck ) | |
| Spindle full output speed | 91 rpm ( Opt. 76 rpm ) |
| Spindle torque ( Cont. ) | 1,935 N-m ( 1,606 ft-lb ) |
| Spindle torque ( 30 min. ) | 3,138 N-m ( 2,605 ft-lb ) |
| X & Z AXES | GV-1000 |
| Max. X-axis travel | 525 mm ( 20.67" ) |
| Max. Z-axis travel | 765 mm ( 30.12" ) |
| X / Z axes rapids | X : 24 m/min. ( 945 IPM ) |
| Z : 20 m/min. ( 787 lPM ) | |
| X / Z axes cutting feed rate | 0.001 - 500 mm / rev |
| Feed rates | 5 m/min. ( 197 IPM ) |
| X-axis servo motor | 4.0 kW ( 5.3 HP ) |
| Z-axis servo motor | 6.0 kW ( 8 HP ) |
| TURRET | GV-1000 |
| Stations | 12 |
| Indexing speed | 1.5 sec. Adjacent |
| OD tool shank size | □ 32 mm ( 1-1/4" ) |
| ID tool shank size | Ø 60 mm ( 2.36" ) |
| LIVE TOOLING TURRET ( OPTIONAL ) | GV-1000 |
| Stations | 12 |
| Live tooling stations | 12 ( Rotate in working position only ) |
| Index speed | 1.5 sec.( Adjacent ) |
| OD tool shank size | □ 32 mm ( 1-1/4" ) |
| ID tool shank size | Ø 60 mm ( 2.5" ) |
| Live tooling shank size | ER 50 / ER 40 ( 0º / 90º ) |
| Live tooling rpm range | 3,000 rpm |
| Cf-AXIS ( OPTIONAL ) | GV-1000 |
| Cf-axis drive motor | 3.0 kW ( 4 HP ) |
| Cf-axis drive ratio | Jan-70 |
| Cf speed range | 30 rpm |
| Cf-axis torque output ( Cont. ) | 833 N-m ( 614 ft-lb ) |
| Indexing angle | ± 0.02˚ |
| Dynamic accuracy | ± 0.01˚ |
| GENERAL | GV-1000 |
| Standard CNC control | FANUC Oi -TF ( Opt. 31i ) |
| Positioning Accuracy | 0.01 mm |
| Voltage / Power requirement | AC 200 / 220 + 10% to - 15% 3 phase / 58 KVA |
| Hydraulic / Coolant tank capacity | 20 L ( 5.28 gal. ) / 250 L ( 66.04 gal. ) |
| Hydraulic motor | 1.5 kW ( 2.0 HP ) |
| Coolant pump / pressure | Cutting Coolant : 0.48 kW ( 0.64 HP ) / 10 kg / cm² ( 142.2 Psi ) |
| Washing Coolant : 0.76 kW ( 1.01 HP ) / 5 kg / cm² ( 71.1 Psi ) | |
| Machine weight | 13,500 kg ( 29,762 lbs. ) |
| Dimensions L × W × H | 2,595 mm x 2,975 mm x 3,050 mm (102.17" x 117.13" x 120.08") |
