Welcome to CTM JSC
| CAPACITY | TS-100 | TS-150 |
| Max. swing diameter | Ø 330 mm | |
| Swing over saddle | Ø 75 mm | |
| Max. turning diameter | Ø 200 mm | |
| Std. turning diameter | Ø 165 mm | |
| Max. turning length | 290 mm | |
| Max. weight load | 50 kg | |
| SPINDLE | TS-100 | TS-150 |
| Chuck size | 6” or 42 collet chuck | |
| Spindle nose | A2-5 | |
| Hole through spindle | Ø 41 mm | Ø 56 mm |
| Bar capacity | Ø 32 mm | Ø 45 mm |
| Front / Rear spindle bearing diameter | Ø 70 / 60 mm | Ø 80 mm / 70 mm |
| Spindle speed range | 60 ~ 6,000 rpm | |
| Motor output ( Cont. / 30 min. ) | 3.7 / 5.5 kW ( 5 / 7.4 HP ) | |
| Spindle drive system | Direct Belt Drive | |
| Cs-AXIS ( OPTIONAL ) | ||
| Cs-axis drive motor | BZ-sensor Ø 82 ( Opt. HEIDENHAIN ERM280-120 ) | |
| Min. spindle indexing angle | ± 0.001° | |
| Dynamic accuracy | ± 0.002° | |
| X & Z AXES | TS-100 | TS-150 |
| Max. X / Z axes travel | 305 / 320 mm | |
| X / Z axes rapids | 24 m/min. | |
| Slide way type | Box way | |
| X-axis servo motor | 0.75 / 1 kW*1 ( 1 / 1.34 HP ) | |
| Z-axis servo motor | 0.75 / 1 kW*1 ( 1 / 1.34 HP ) | |
| TURRET | TS-100 | TS-150 |
| Stations | 8 | |
| Indexing drive | FANUC β4 / 4,000 is | |
| Shank size | □ 20 mm ( Gang type □ 20 mm ) / | |
| 25 mm ( Gang type Ø 25 mm ) | ||
| LIVE TOOLING TURRET | TS-100 | TS-150 |
| ( OPTIONAL ) | ||
| Stations | 8 | |
| Shank size | □ 20 mm ( Gang type □ 20 mm ) / | |
| 25 mm ( Gang type Ø 25 mm ) | ||
| Live tooling shank size | ER 20 ( Ø 13 ) | |
| GENERAL | TS-100 | TS-150 |
| Control | FANUC Oi -TF / MITSUBISHI E60L | |
| Positioning Accuracy | 0.01 mm | |
| Coolant / Hydraulic tank capacity | 80 / 30 L | |
| Machine weight | 1,750 kg | |
| Dimensions ( L x W x H ) | 1,923 X 1,353 X 1,700 mm | |
